You are currently viewing: FGCORP market Global
All markets
Global
Austria
Belgium FR
Belgium NL
Czech Republic
Denmark
Finland
France
Germany
Hungary
India
Ireland
Italy
Netherlands
Poland
Romania
Singapore
Spain
Sweden
Turkey
UAE
United Kingdom

Smoke extraction Systems

Smoke extraction system solutions support in maintaining a smoke-free area which creates a means of escape and better access for fire fighters.

10 Storey building

For space-constrained multi-storey residences requiring mechanical smoke extraction to maintain smoke-free means of escape and fire fighter access. Mechanical smoke extract from corridors/lobbies provide reduced riser areas, can provide increased travel distances and is less susceptible to adverse wind pressures acting on the discharge Air Operating Vent [AOV] when compared to natural smoke vent systems.

Solution

1No. SMHA extract fan was selected to provide the required extract duty, 20No. ESAS smoke control dampers – one per level on extract side and 1 per level on make-up air route were provided to allow for only the fire level to have smoke ventilation, all other levels were closed off to prevent the spread of smoke. CFD analysis was also provided for this project to demonstrate the visibility achieved.

EXAMPLE BUILDING

10 storey apartment building with a calculated fire load of 1MW in a residence with door held ajar by debris during occupant escape, causing smoke spread into the connecting lobby with other residences and an extended travel distance to the single escape stair core.

 

Ventilation requirement: smoke extract from corridor to increase visibility for fire-fighter access.

2 Storey building

For Multi-compartment buildings needing fire-rated ducts and dampers to maintain compartmentation between areas.

 

Fast-Response dampers are required to limit smoke spread between compartments. CE marking ensures a guaranteed level of quality and air leakage for life-safety equipment.

image

EXAMPLE BUILDING:

2 storey office served by a central air handling plant with a common smoke extract shaft and dedicated smoke extract fan.

Sales contacts

Our people

    Offices & 3rd party contacts

      Recently viewed products

      • eQ PRIME SIDE AIR HANDLING UNIT

        eQ PRIME SIDE AIR HANDLING UNIT

        Compact Air Handling Units

        Our standardized range of air handling units, offering 8 different sizes with air flows from 0.2 m3/s (720 m3/h) to 6 m3/s (21 600 m3/h). This plug & play solution is packed with energy efficient components, integrated controls and offers energy recovery of up to 86% with an SFP lower than 1,5 kW/m3/s. Compact and functional – bringing installation and operating cost to a minimum. Our integrated controls ISYteq 4.0 makes the unit Smart, Easy to handle and Connected.

        • Energy efficient components and integrated controls
        • Plug and Play installation
        • Short Delivery time
        • Connected
        Go to product
      • OPTIVENT® ULTRA - ULDA VAV DAMPER

        OPTIVENT® ULTRA - ULDA VAV DAMPER

        Variable Air Volume Dampers

        Pressure independent supply and extract VAV/ CAV damper for Demand Controlled Ventilation with integrated air flow and temperature measuring. Air flow measurement is based on ultra sound technology.

        • Accurate air flow measurement
        • No pressure loss nor noise of the air flow measurement
        • Large air flow range
        • Small influence of dust
        Go to product
      • EMSD CIRCULAR FLOW VARIATOR

        EMSD CIRCULAR FLOW VARIATOR

        Variable Air Volume Dampers

        Accurate real time flow variator for Demand Control Ventilation. Nipples for manual measurement.

        • Real time air flow display
        • Setting up values requires no special tools
        Go to product